Ampere is a very useful tool to find out the voltage you'll need to charge your battery. This means you can figure out if your old charger still works or if you should change it in order to recharge your device in a safer and more efficient way.
The information Ampere provides can vary depending on whether you're connected to a power source, but generally it can tell you the status of the battery, current battery percentage, technology used in its manufacture, temperature, model, device version, and IP address. If your device is charging, the application can also tell you the voltage coming from the power source to which you are connected.
After a pre-scan, you can see the amp-hours your device is receiving when it's connected and how much it's consuming without it. With this data, you can calculate the mA you need to charge your battery at a normal rate.
When the device is not connected, you'll see the value as a negative number. To charge it, you need a difference of at least 200 mA. So, for example, if your device consumes 300 mA, you'll need a charger that gives you at least 500mA if you want to use the device as it charges. The less energy you have, the less efficient the charging method.
Requirements (Latest version)
- Android 5.0 or higher required
Comments
I went through a lot of similar applications, this is what I liked the most. Everything is simple and clear, a minimum number of settings, everything on the topic without glamor.
Hello, on my phone wiki lenny 3 I notice that the current only decreases until it becomes zero so my phone charges not what to do?
It is convenient to compare the effectiveness of magnetic (non-contact) charging with a cable and evaluate the discharge current depending on the programs included.